If your home in St. Charles runs on a private well, the water coming out of the tap is only part of the air question. Radon is a naturally occurring radioactive gas that can dissolve in groundwater. When that water is agitated, through a shower, a running faucet, or a washing machine, some of the gas can escape into the air of the room. This guide explains how to check whether that matters in your home and what to do next.
Why the well matters
Private wells in and around St. Charles tap the Missouri River alluvial aquifer. Local context describes naturally occurring radium and uranium in some groundwater, and these may be amplified near the documented Weldon Spring legacy site. Radon is a separate substance, but it can also be present in groundwater, so testing the water itself is the only reliable way to know what your well carries.
Where the gas leaves the water
Indoor air picks up dissolved gas most where water is disturbed and the room has little fresh air. In many homes these spots include:
- The basement or utility room where the pressure tank and pump sit
- Bathrooms, especially during and right after a shower
- Laundry areas where the washer fills and drains
- Any small, closed room near a water line with a leak or a sump
Air checks you can do this week
- Trace the well line from where it enters the house to the pressure tank, and note every room it passes through.
- Look at the pump room or utility area for any window, vent, or exhaust fan. A closed, unventilated space is the one to watch most.
- Run the bathroom exhaust fan during and after showers, and keep the bathroom door closed while showering so the air does not spread.
- Place a radon air test kit in the lowest livable level of the home, away from drafts, vents, and doors, and follow the kit instructions exactly.
- Record the placement, date, and any ventilation changes, so the result can be compared with later tests.
Test the water, not just the air
An air test shows what the room held during the test period. It does not tell you what the well delivers over time. For a private well, a water sample sent to a certified laboratory is the step that answers the question of what is in the water. Ask the lab to test for radon and for the metals and other contaminants that local groundwater may carry. Keep the lab report with your well records so you can compare future samples.
Reducing radon from well water
If results show radon in the water or the air, the fix usually starts with better ventilation of the pump room and bathrooms, then moves to treatment at the source. Common approaches include aeration, where water is exposed to open air in a controlled tank, and granular activated carbon filtration. Each method has its own maintenance needs, and the right choice depends on the lab results and how the water is used in your home. A qualified water treatment professional can match a method to your numbers and your layout.
When to act
Use the lab report and air test together. If the water test or the air test shows a concern, bring both results to a qualified water professional and ask for a written plan that explains what will be done, why, and how the results will be checked afterward. Do not rely on a single air reading taken during a dry week or with the windows open, since those conditions can make the result look better than it is.
Radon in private well water is a common local question because the St. Charles area draws on river and groundwater together. Testing both the water and the indoor air gives you a clear starting point, and a written record makes the next decision much easier.